•This
automation system is used to control an industrial oven where
temperature settings for different products must be selected
from the PLC
•The
application requires synchronization of the temperature and
the different alarm set points
ESA
SOLUTION
•By using
ESA terminals the thermo regulator settings can be completely
linked to the PLC registers without any additional hardware,
allowing the user to log and store production data seamlessly.
(Link can be done via any RS485 multidrop or CANopen
protocol).
•Connect to
facility network via ESA connection, or use existing PLC
network.
•Recipe
setups stored in ESA terminal for each different product.
Recall setups with touch of a button.
Application Note #01