| Filename |
Filesize |
Description |
| 32BIT.BLD |
2K |
Writing
long integers to PLC and read them back. |
| IDC-CMD.BLD |
3K |
Constructing
programs as a string in 1000 or IDC-MT, then
downloading to IDC Smart Step |
| ATS.BLD |
2K |
ETI
link example, sends user entered data via ETI link. |
| B5T.BLD |
1K |
Sending
commands out COM1 to a motion controller |
| BAR.BLD |
2K |
Walks
the user through the setup of a bargraph. |
| BD5GOLD.BLD |
14K |
Industrial
Drives' Goldline Positioner demonstration. |
| BDS5DEMO.BLD |
4K |
Demonstrates
the Industrial Drive's BDS5 servo drive. |
| CHART.BLD |
1K |
This
is a graphic simulation of a running chart recorder on
the screen |
| CIRCLE.BLD |
1K |
Draw
Circles!!!! Example drawing incorporating circle
subfunction. |
| CNCGRN.BLD |
7K |
NAC's
5-axis grinder program, uses SX drives. |
| CLRNVOL.BLD |
2K |
Clears
nonvolatile memory in 1000 or 1100. |
| CURSOR.BLD |
7K |
Demonstrates
a data entry screen. |
| DEMOBOX.BLD |
31K |
Self
running full demo of 1100 capabilities |
| DLOOP.BLD |
18K |
This
tests the 1100's options (A03, clk, etc.). |
| DTEST.BLD |
17K |
This
is a self test for ther the 1100/1000 (tests M02/M03,
I/O, COM, etc.). |
| EASON.BLD |
8K |
Introductory
1100 program, self loop demo |
| EAS1000.BLD |
7K |
Introductory
1000 program, self loop demo |
| EASY.BLD |
1K |
Easy
intro |
| EASY1.BLD |
1K |
Easy
intro +com |
| EDITRCPE.BLD |
10K |
EdExample
of implementing recipe storage, uses the M02 option. |
| ENCODER.BLD |
1K |
Uses
C02, displays degrees, interrupts on I/O & records
angle. |
| IDDEMO3.BLD |
14K |
BDS5
IDC Goldline positioner |
| IO.BLD |
2K |
demo
showing I/O ability of 1100 |
| IO3.BLD |
3K |
Reads
a counter, interrupts on I/O, sets clutch if
necessary. |
| IOINT.BLD |
2K |
ExSets
up an interrupt routine to run when the I/O changes
state. |
| IOINTPAT.BLD |
2K |
I/O
bits 0&1 are automatically mirrored to I/O bits
2&3 |
| JOG.BLD |
2K |
Demonstrates
how to set up jog keys |
| JOGSX.BLD |
2K |
Jog
program for SX drive |
| KEYLOOP.BLD |
2K |
Shows
how to execute code only while a key is being pressed. |
| MASTER.BLD |
2K |
Setting
up Eason as ETI Link master |
| NEWEASY.BLD |
1K |
Freaked
out easy demo with a counter |
| NEWSHOW.BLD |
6K |
AX
motor drive example |
| NUMBER.BLD |
1K |
Displaying
various number text sizes on screen |
| NVOL2PC.BLD |
3K |
Saves
NVOL registers (M02) to a PC file using an ASCII
terminal txfer. |
| NVOLCLR.BLD |
3K |
Clears
NVOL registers (M02, M02+, M03). |
| PACNEW.BLD |
22K |
PacSci
5240 and 5345 motor drive example. |
| PARKER.BLD |
13K |
SX,
AX motor drive demonstration. |
| PASSWORD.BLD |
2K |
Demonstrates
how to perform hidden password protection. |
| PAULH.BLD |
2K |
Analog
sensor demo from input 1 |
| PID.BLD |
5K |
Example
PID loop code |
| PLCS.BLD |
13K |
Example
of how to read and write to various PLC locations in
basic. |
| PLCTEST.BLD |
3K |
Writing
commands to a PLC |
| PMAC.BLD |
19K |
This
is the demo builder file for the PMAC. |
| POLYTRON.BLD |
1K |
PLC
program |
| PRTDBASE.BLD |
3K |
An
example of retrieving part data (height, etc.) based
on part number |
| RAMPTST.BLD |
3K |
Constructing
a ramp |
| RPM.BLD |
3K |
Displays
RPM from an encoder on channel 1..4 using -C02(s). |
| SAVENVOL.BLD |
2K |
Saves
NVOL data to a disk file via ASCII transfer to Procomm
on a PC. |
| SERIAL.BLD |
1K |
Example
of serial input/output |
| SETCLOCK.BLD |
1K |
Reads
date and time from -CLK option, user may change from
keypad. |
| SHOW.BLD |
26K |
91
show file motor/react/quick/analog/show |
| SHOWLITE.BLD |
25K |
Another
1100 show program |
| SLAVE.BLD |
1K |
Setting
up Eason as a slave |
| SX.BLD |
17K |
SX
motor demonstration. |
| SYMAX.BLD |
3K |
Example
of an interace to a Square D SY/MAX PLC. |
| TEMP.BLD |
1K |
Waiting
for a char from COM2 |
| TESTBDS.BLD |
4K |
Test
program for the BD5 servo controller. |
| TESTIO.BLD |
1K |
Testing
to see if I/O matches needed value |
| TRAIN.BLD |
2K |
A
demo 1100 program |
| TUTOR1K.BLD |
18K |
Walk
through for WinBuild |
| YASKAWA.BLD |
19K |
Example
of a driver for the Yaskawa servo motor controller. |